125khz card reader
Handheld RIFD Smart Duplicator 125Khz-13.56Mhz Card Reader NFC Key Writer T5577 Clone IC/ID Badge Tag Copier
Handheld RIFD Smart Duplicator 125Khz-13.56Mhz Card Reader NFC Key Writer T5577 Clone IC/ID Badge Tag Copier
Hello, Welcome To The Shop To Buy. Thank You For Your Trust. Each Package Is Consistent With The Picture. Please Choose The Package You Need.
The Technical Parameters Are As Follows:
The New Upgraded Product, Compared With The Previous 05cd, Has Optimized The Internal Structure In The Process And Upgraded The Interior. Compared With 05cd, The Reading And Writing Speed Is Faster And The Sensing Is More Sensitive.
1) The Product Has Been Upgraded And Ensured To Be Brand New, And Comes With Operation Videos And Instructions For Use.
2) Small Size, Ergonomics, Convenient To Carry, And Convenient For Daily Use.
3) The Design Of Reading (English Voice) And Writing Buttons Makes The Operation Easier And More Convenient.
4) Automatically Detect The Frequency For Reading And Writing.
5) Support Read And Write Frequency: Id-125/250/375/500Khz, Ic: 13.56mhz.
6) Support Reading Most Cards Currently On The Market, And Will Support More And More In The Later Optimization, Unable To Read And Write Ic Encryption Cards And Power Or Hid Cards (Very Few Special Types Of Cards).
7)If You Need To Copy The Ic Encryption Card, Please Contact The Online Customer Service To Recommend The Product.
There are two ways to stick machine stickers, one is just sticking to the screen. The other is to cover the keys, only a small difference in appearance, the functions are all the same. At the same time, the actual support functions of the machine are:
125/250/375/500Khz and 13.56Mhz.
Dear Friend, Thank You Very Much For Visiting Our Shop To Purchase. If You Encounter Any Problems, Please Contact Me First To Solve Them For You.
This Shop Provides Free Machine Software And Technical Guidance Within The Capacity (Whether You Shop Or Not, I Hope To Help You)
Our Own Factory Can Provide You With A One-Stop Solution Service And Support The Customization Of Card Machine Products. If You Need Assistance, I Will Be Happy To Help.
I Wish You Good Health And A Happy Life.
Chafon 125khz min OTG rfid reader with keyboard emulation
Chafon 125khz min OTG rfid reader with keyboard emulation
Product Description
Technical parameter |
Model number | CF-RL300 |
Frequency | 125KHz |
Support chip available | TK4100 compatible chip |
Work mode | Read only |
Read range | 1-3cm(depends on tag) |
Read time | <0.5s |
Baud rate | 9600 |
Power supply | +5V DC |
Consumed current | 100mA |
Reader size | 35*35*7mm |
Weight | 20g |
Reader colour | white |
Interface | OTG |
Service Temperature | -10℃~+70℃ |
Product Application
Packing List
HF mini USB reader*1 piece
125KHz RFID Programmer Duplicator Copier Writer Reader Writer ID Card Cloner & key
IDW01 RFID Reader Duplicator 125khz
Handheld shape design, comfortable hand feeling and high quality.
2 buttons for simple operations.
Standalone operation, no need to connect with computer / PC, easy to use.
Built-in individual LED lights and buzzer indicator.
Reading distance is 0 - 6cm.
Can only copy 125KHz RFID card, Compatible with T5577, CET5200, EM4305 and EN4305.
Parameter
Read: EM / TK (EM4100 TK4100 etc) cards or keys
Write: EM4305 CET5557 T5577 5200 EM4205 etc cards or Keys
Built-in: individual LED lights and buzzer indicator, transceiver antenna
Power Supply: 3V (2 x AAA battery)
Times: Read / Write > 20000 times
Size: ( L*W*H ): 115 x 70 x 30mm
Weight: 85g
English 10 Frequency RFID Reader Writer Copier Duplicator IC/ID with USB Cable for 125Khz 13.56Mhz Cards LCD Screen Duplicator
T5577/EM4305 are all ID-125KHZ frequency, and the card is empty when leaving the factory, it can be read after writing, please be aware.
This product is not suitable for bank cards! !
Cannot write electronic label stickers and electronic label cards(NTAG 213)
If the device cannot be connected, please do not put the battery when connecting to the computer
This machine only supports 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1M, HID-125khz, 13.56mhz (ic mode) read and copy, supports most IC encryption card decryption (but not all), does not support Copy CUID and FUID chip cards, do not support cards with power supply
How to Crack encryption 13.56Mhz cards:
Support cuid/fuid/ufuid chip card
Please read it carefully and follow the steps as below:1. High-definition 3.2-inch full-color screen, clear display, built-in multi-language
2. Support language broadcast
3. This model is a locksmith version of the duplicator, supports copying full-band ID, IC encryption card, with its own decoding, and can be directly configured with various access control cards and smart cards
4. Support read and write frequency: 125 khz, 250 khz, 375 khz, 500 khz, 625 khz, 750 khz, 875 khz, 1000 khz, 13.56 khz, and support hidden proximity card (HID card-125Khz).
5. Compatible with all blank cards, universal in the whole market
6. Support 8310, 8265, 8268
7. Support CUID, UFUID, FUID
8. Solve IC/ID firewall, support copy elevator card, card with firewall
9. Support manual modification of card number
10. Use 4 AAA batteries, standard handheld, easy to carry
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
Conneted with copier with computer via USB cable,
then Press the "on/off" button,
then the copier will be show the "Disclaimer"page,
NOT press any button on the Copier,
then your computer will show a removeable disk,
there are the manual and the software,
Press the button "OK" to agree with the Disclaimer on the computer fistly,
then argee with the copier's "Disclaimer"page,
that's will be connect successfully,
put your original cards on the back side of the Read/Write area,
then press the button "scan"to crack the passwords,
after 2 or 5 minutes,the passwords will be cracked successfully,
then put one UID cards in the read/write area,
How to copy the 125khz RFID cards:
Press the "on/off "button,
put the original 125khz cards on the back of the copier,
then the copier will be show the "Disclaimer"page,
then put the cards on the back side of the copier,
then the copier will auto scan it is 125khz cards,
and the copier will show the card number,
then we put one writable EM4305 key on the back side of the copier,
then press"Write",
RFID Reader USB Port EM4100 TK4100 125khz ID Contactless Sensitivity Smart Card Support Window System Linux
IDRead02 RFID Reader 125khz
The ID card reader is a 125kHz driverless which read ID card reader. When using, you can freely insert (plug and play), without external power supply, it does not need to load any driver, it can read the serial number in the RFID card and output to the computer through the data interface, which is equivalent to the automatic keyboard input .
How to use
After the card reader is connected to the computer, the card reader enters the self-test and initialization from the "drop" sound, and the card reader has entered the state of waiting for the card to be swiped, and the indicator light is "red" at this moment. Open the computer's output software (such as: Notepad WORDEXCEL and other editors), put the card close to the card reader, the red light flashes green and then turns red, and the buzzer sounds to send data, that is, automatically The card number is displayed at the cursor of the computer.
Support 125khz chips reading
EM4100 / EM4102 / TK4100 etc, but not all chips under 125khzs
RFID Copier Duplicator 125KHz Key fob NFC Smart Card Reader Writer 13.56MHz Encrypted Programmer USB UID T5577 EM4305 Cards Tags
125KHz / 13.56MHz Frequency NFC Smart Card Reader Writer
RFID Copier / RFID Reader / RFID Writer / RFID Duplicator
Product Features
1) Compliant with CCID
2) Compliant with PC/SC
3) Support IC/ID dual frequency replication
4) Driver-free, no need to download software installation
5) When connect the RFID Reader to the computer with the USB cable, then can find the software.
6) Support ID125K, 8800, 5200, 4305, 5577, 8265 card.
7) Support UID FUID CUID UFUID IC semi-encrypted card, IC full encryption card.
8) Has USB full speed interface
9) Two-color LED light prompt (red light is standby, green is working)
10) Built-in buzzer "beep" sound reminder
Product Parameters:
Dimensions: 108 (L) X 68 (W) X 12 mm (H)
Interface: USB full speed
Working Voltage: 5 V DC
Working current: 200mA
Standby current: 50mA
Normal current: 100mA
Working frequency: 125KHz / 13.56 MHz
Smart card support: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc.
For 13.56MHz IC type: UID FUID CUID UFUID IC Half-encryption, IC Full-encryption etc.
Supported operating systems: SupportWindows computer. Not support Linux, Mac.
How to use the card reader?
1) Connect the device to your computer with the USB cable.
2) You can find and open the software on your computer.
Read and write ordinary 125KHz RFID card
1. Place the card on the card reader and press "Read" on the software to scan the card.
2. The software will scan and display the card number
3. Place a writable T5577 (125KHz writable chip) on the card reader and press "Write" on the software.
Read and write 13.56MHz IC, IC half encryption card, IC full encryption card
1. Place the card on the card reader and press "Card number" or "Start decoding" on the software.
2. The software will scan and display the card number
3. Place a writable UID (13.56MHz writable chip) on the card reader and press "Write Card" on the software.
Product Details
Light weight body, Mini Design
ABS flame-retardant material casing, small and light, the interior is controlled by high-quality microchip, and the card reading effect is fast.
LED indicator light / buzzer
The LED indicator light is red under standby mode, and it's green under the card reading status. Built-in buzzer, very convenient for effective prompts.
Anti-slip mat at the bottom
The bottom is made of a sponge mat, and the inside of the sponge is a removable screw.
USB full speed and efficient
1.2m long USB transmission cable, fast response. No need to install the driver, quickly read the card number
Built-in mobile disk with software, plug and play
Connect the RFID reader to your computer with the USB cable, then can find the software
Hot Question:
1) Where can i download the software?
Answer: You can download the software via this link:http://www.nsccn.com/download/soft/nfc/nfcPro_wbw.exe
2) Which chip inside in the 5pcs blue keyfobs and 5pcs white cards?
Answer: If you buy the RFID copier + 5pcs UID keyfobs + 5pcs T5577 cards. The 5pcs UID keyfobs is working with 13.56MHz frequency, used to copy the MF 1k card. The 5pcs T5577 cards is working with 125KHz frequency, used to copy the EM4100, TK4100 cards. They are different type card.
3) Why the 5pcs cards in the package read failure?
Answer: Please don't worry, these 5pcs white cards is T5577 (EM4305) type, they haven no data before write. They will can be read successfully after finished written from your TK4100 or EM4100 type card. Thank you.
Handheld 125KHz EM4100 RFID Copier Writer Duplicator Programmer Reader EM4305 T5577 Rewritable ID Keyfobs Tags Card
RFID Reader Duplicator 125khz
Handheld shape design, comfortable hand feeling and high quality.
2 buttons for simple operations.
Standalone operation, no need to connect with computer / PC, easy to use.
Built-in individual LED lights and buzzer indicator.
Reading distance is 0 - 6cm.
Can only copy 125KHz RFID card, Compatible with T5577, CET5200, EM4305 and EN4305.
Parameter
Read: EM / TK (EM4100 TK4100 etc) cards or keys
Write: EM4305 CET5557 T5577 5200 EM4205 etc cards or Keys
Built-in: individual LED lights and buzzer indicator, transceiver antenna
Connection: USB cable connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP,Windows7/ 8 / 10 etc)
Power Supply: 3V (2 x AAA battery)
Times: Read / Write > 20000 times
Size: ( L*W*H ): 115 x 70 x 30mm
Weight: 85g
How to use
Read: Put the inductive proximity card (EM4100 or TK4100 or has inside info EM4305 or T5577) in the induction area and hold the read key (left one). The buzzer will sound emitted by the green indicator for success. If the power light is only blinking, then the card reader failed.
Copy: After the reading is successful, put the blank card in the induction area and hold the copy key(right one). The buzzer sound emitted by the yellow indicator for success. If the power light is only blinking, then the card reader failed.
Card Purchase Answers:
Q: The difference between IC and ID card.
A: The frequency of the IC card is 13.56MHz, and the frequency of the ID card is 125KHz, so the card cannot be used universally.
Q: The difference between an authorization card and a copy card.
A: The authorization card, also known as the property card, is divided into two types: IC/ID. The property needs to be added to the access control system before it can be used normally, otherwise the card cannot be swiped. Copy card can copy the information of other cards and write it into this card for use.
Q: There is no response when the card is swiped or the card is invalid after being swiped once.
A: Some access control systems or elevator systems have firewalls and rolling code functions to prevent copying. You can try copying with cards that can penetrate firewalls and devices that can write rolling codes.
RFID Duplicator Card Reader Q&A:
Q: The card is copied successfully and cannot be used normally.
A: IC/ID cards with different chips and frequencies. For example, the access control system has a firewall or a special chip. It may be copied normally, but it cannot be used normally. You can confirm the type of access control card with the customer service first.
Q: The ID card cannot be copied and read
A: The ID card has various frequencies such as 125KHz/250KHz/350KHz/500KHz. The most common one in the market is 125KHz, so there is a situation where it cannot be written after reading. (Need to purchase ID cards with the same frequency)
Q: The card expires after being used once.
A: Usually, there is a firewall in the access control system, and the copy card is shielded, so that it can only be swiped once. It is recommended to buy a card that can penetrate the firewall to use.
Q: The copy card is successful, but the original card is invalid.
A: This situation is caused by the existence of a rolling code anti-duplication system in the access control system, which needs to be solved by using a machine that can copy rolling codes. Q&A:
Q: The card is copied successfully and cannot be used normally.
A: IC/ID cards with different chips and frequencies. For example, the access control system has a firewall or a special chip. It may be copied normally, but it cannot be used normally. You can confirm the type of access control card with the customer service first.
Q: The ID card cannot be copied and read
A: The ID card has various frequencies such as 125KHz/250KHz/350KHz/500KHz. The most common one in the market is 125KHz, so there is a situation where it cannot be written after reading. (Need to purchase ID cards with the same frequency)
Q: The card expires after being used once.
A: Usually, there is a firewall in the access control system, and the copy card is shielded, so that it can only be swiped once. It is recommended to buy a card that can penetrate the firewall to use.
Q: The copy card is successful, but the original card is invalid.
A: This situation is caused by the existence of a rolling code anti-duplication system in the access control system, which needs to be solved by using a machine that can copy rolling codes.
Chafon uhf rfid reader iso18000-6B 6C protocol provide SDK and uhf testing card used for parking management
Chafon uhf rfid reader iso18000-6B 6C protocol provide SDK and uhf testing card used for parking management
Product Description
Model number description |
Model number | Work mode | Interface |
CF-RU5102 | Read and write | USB (Virtual Serial Port) |
CF-RU5102k | Read only | USB (HID Keyboard Emulation) |
Technical parameter |
Frequency | 865~868MHz(EU standard),902~928MHz(US standard) |
Protocol | ISO18000-6B/6C(EPC GEN2) |
Work mode | Read only (24 digit Hex EPC number) Read and write |
RF power | 13dbm (adjustable power is for CF-RU5102 read &write) |
Read distance | 1-20cm(depends on tag) |
Interface | USB |
Power supply | 5V |
Operation temp | -10~+60℃ |
Storage Temp | -25~+80℃ |
Size | 105*70*11mm |
Net weight | 57g |
Product Application
Packing List
UHF reader:1 piece
Sample UHF card:1 piece
USB cable :1 piece
Handheld 125KHz EM4100 RFID Copier Writer Duplicator Programmer Reader + EM4305 T5577 Rewritable ID Keyfobs Tags Card
For the keyfobs, we provide the Random color by default, if need the Blue or Yellow or Red or Orange or Pink or White or Green or Black or Light Black ones, please leaving message, for example, leaving message "please arrange 2 Blue, 2 Yellow, 2 Red, 2 Black, 2 White"
Read and Copy and duplicate the 125 Khz EM4305 CET5557 T5577 5200 EM4205 card / tag etc.
Support 125Khz EM4100 / EM410X or compatible card /tag format (HID standard NOT compatible!)
2 buttons for Simple operations!!
Standalone operation, NO need to connect with computer / PC. Easy to use: 1. push the read button to read the card. 2. take a new card and write on it. Very easy and comvenient!!
Built-in individual LED lights and buzzer indicator
Built-in transceiver antenna
Battery power supply : 3V ( 2 x AAA battery)(Batteries not included)
Small & Protable design : (115 x 70 x 30) mm
Read / Writable card & keyfobs can be cloned and copied > 20000 times with difference IDs
Note: this duplicator only can copy 125KHz RFID cards/tags
Package Included:
How to use
Read: Put the inductive proximity card in the induction area and hold the read key(left one),the buzzer will sound emitted by bit, the green on, successful reader. If there is no reflection but only the power light is blinking, the reader fail.
Copy: After successful read,put the blank card in the induction area and hold the copy key(right one), the buzzer sound emitted by bit,yellow light on,indicating that the copy --- successful. If there is no reflection but only the power light is blinking, the copy fails.
RFID Duplicator Card Reader 125KHz EM4100 Copier Writer Video Programmer T5577 Rewritable ID Keyfobs EM4305 Tags Card
IDW01 RFID Reader Duplicator 125khz
Handheld shape design, comfortable hand feeling and high quality.
2 buttons for simple operations.
Standalone operation, no need to connect with computer / PC, easy to use.
Built-in individual LED lights and buzzer indicator.
Reading distance is 0 - 6cm.
Can only copy 125KHz RFID card, Compatible with T5577, CET5200, EM4305 and EN4305.
Parameter
Read: EM / TK (EM4100 TK4100 etc) cards or keys
Write: EM4305 CET5557 T5577 5200 EM4205 etc cards or Keys
Built-in: individual LED lights and buzzer indicator, transceiver antenna
Connection: USB cable connection to PC (Plug and Play, Driverless for Windows 2000, 2003, XP,Windows7/ 8 / 10 etc)
Power Supply: 3V (2 x AAA battery)
Times: Read / Write > 20000 times
Size: ( L*W*H ): 115 x 70 x 30mm
Weight: 85g
How to use
Read: Put the inductive proximity card (EM4100 or TK4100 or has inside info EM4305 or T5577) in the induction area and hold the read key (left one). The buzzer will sound emitted by the green indicator for success. If the power light is only blinking, then the card reader failed.
Copy: After the reading is successful, put the blank card in the induction area and hold the copy key(right one). The buzzer sound emitted by the yellow indicator for success. If the power light is only blinking, then the card reader failed.
black stocking captall canister bootsart deco night lightstrapon chastity beltlong hose socksiphone 6 power flexkorean male cardiganwrite and erase penglitter christmas ornamentbig art for wall nursing bras muslim skirt long
